ORPHEUS MK3S
Orpheus is a modern masterpiece that uses only two vacuum tube gain stages with zero feedback and a passive LCR equalizer between them. Moving coil sources are handled by a built in step-up transformer taking advantage of its balanced differential nature. Switching the ground plane only to the active input ensures there are no hum loops or induced ground noise even with multiple turntables.
$27,000
HEROS MK2
Heros is like no other amplifier ever made as it has a single differential DC coupled FET/Tube stage working like a single super tube. This DC coupled cell is loaded by a low impedance push-pull transformer helping improve the efficiency to almost double that of a normal Solid State Class A designs. The output transformer blocks DC on the output and presents many other benefits by isolating EMI/RFI, scaling down the output voltage (reducing residual noise) and protecting the output from any power supply noise by canceling it by the nature of it's differential operation.
$47,000
MAXIMINUS MK2S
Maximinus uses a concept called R2R ladder. This is a resistor matrix that is switched for the various output levels delivering a fraction of an internal reference (much like a volume control). In order to bring the performance of multibit DACs to new levels a very fast and sophisticated switching logic controlling them had to be implemented. The in-house developed 1ppm precision conversion module takes advantage of the available resolution and bandwidth to present you the naked truth.
$38,500
TERES MK2 MONO
Single-ended tube input stage loaded with a phase splitting transformer controlling 2 separate out of phase single-ended amplifiers for output. The tube handles all the voltage gain needed. It uses a new generation of our choke-rectified shunt-regulated power supply providing a noise-free operating point, clear tone and unbelievable dynamics.
$37,500
DIONYSOS
The control amplifier is the centerpiece of every high-end audio system. It is responsible for source selection, signal conditioning and volume control. It has the task to match the output of your source to the input of your power amp. Its output stage has to drive any power amplifier through any length of cable with optimal quality via balanced or unbalanced lines, while resisting any interference.
$27,000
TERES MK2 STEREO
Teres uses a single-ended tube input stage loaded with a phase splitting transformer. The transformer then feeds two separate out of phase single-ended amplifiers for output. The tube handles all the voltage gain needed giving the overall sonic character with high content of second harmonic. It is based on the Dionysos gain stage using a new generation of our choke-rectified shunt-regulated power supply providing a noise-free operating point, clear tone and unbelievable dynamics with zero modulation of the noise for.
$27,000